Removing The Chassis Clamp Lock; Side Access Panel; Removing The Side Access Panel - HP Xw4600 - Workstation - 2 GB RAM Technical Reference Manual

Removing the chassis clamp lock

To remove the lock:
1. Unlock the device and remove the locking mechanism.
Figure 5-5
2. Remove the screw attaching the lock to the chassis.
Figure 5-6

Side access panel

Before accessing the internal components of the workstation, the side access panel must be removed.
This section describes how to remove and replace the side access panel.

Removing the side access panel

To remove the side access panel:
ENWW
Unlocking the device
Removing the lock screws
Removing and replacing components 61