Hp Softpaq Download Manager; Diagnostic Led Codes - HP Xw4600 - Workstation - 2 GB RAM Technical Reference Manual

HP SoftPaq Download Manager

The HP SoftPaq Download Manager enables you to download software updates for your workstation
from the HP support site. To use the download manager:
1. Go to http://www.hp.com/support/workstation_swdrivers.
2. Select your workstation model, operating system, and language, and then click Find Available
SoftPaqs. All available SoftPaqs matching the selected criteria are displayed.
3. Select the updates you want to download.
4. Select Download.

Diagnostic LED codes

NOTE: Workstation beeps are emitted from the onboard piezo speaker, the chassis speaker. The
flashing lights and beeps repeat for five cycles. After five cycles, only the flashing lights repeat.
Table 6-1 Diagnostic LED codes
Chassis indicator LEDs
Power LED and sound
activity
None
ENWW
Diagnosis and service action
Workstation does not power on. Press the power button. If the hard drive LED is
GREEN, then:
1. Remove expansion cards one at a time.
2. Replace the system board.
OR
Press the power button. If the hard drive LED does not illuminate, then:
1. Verify that the workstation is plugged into a working AC outlet.
2. Open the access panel and verify that the power button harness is properly
connected to the inline front panel I/O device assembly connector.
3. Verify that the power supply cables are properly connected to the system board.
4. Verify power supply functionality.
a. Disconnect AC power.
b. Remove all internal power supply cables from the system board.
c. Plug in AC power.
◦ If the power supply fan spins and the BIST LED illuminates, then the power
supply is good. Replace the system board.
◦ If the power supply fan does not spin or the BIST LED does not illuminate,
then replace the power supply.
Customer Self Help 111