Bios Rom; Using The Computer Setup (F10) Utility - HP Xw4600 - Workstation - 2 GB RAM Technical Reference Manual

BIOS ROM

The BIOS ROM is a collection of machine language programs stored as firmware in ROM. It includes
functions such as POST, PCI device initialization, Plug and Play support, power management, and the
Computer Setup (F10) Utility. The BIOS ROM is a 1-MB Serial Peripheral Interface (SPI) port. The
firmware contained in the BIOS ROM supports the following systems and specifications:
●
Microsoft Windows Hardware Quality Labs (WHQL)
●
Alert-On-LAN (AOL) and Wake-On-LAN (WOL)
● Advanced Configuration and Power Interface (ACPI) 1.0 and OnNow
●
System Management BIOS (SMBIOS) 2.3.5
●
PC98/99/00 and NetPC
●
Preboot Execution Environment (PXE) boot ROM for the integrated LAN controller
●
BIOS Boot Specification 1.01
●
Enhanced Disk Drive Specification 3.0
●
"El Torito" Bootable CD Format Specification 1.0
● AT Attachment Packet Interface (ATAPI) Removable Media Device BIOS Specification 1.0
●
Multiprocessor Specification (MPS) 1.4 (for booting Linux SMP)

Using the Computer Setup (F10) Utility

You can only open the Computer Setup (F10) Utility by powering on or restarting the workstation.
To access the Computer Setup (F10) Utility menu:
1. Power on or restart the workstation.
2. As soon as your display is active and F10=Setup appears in the lower right corner of the screen,
press the
NOTE:
on, and press
boot if you miss the opportunity to press F10.
3. Select your language from the list and press the
menu, five headings are displayed: File, Storage, Security, Power, and Advanced.
4. Use the left and right arrow keys to select the appropriate heading. Use the up and down arrow
keys to select an option, and then press Enter.
5. To apply and save changes, select File>Save Changes, and then select F10=YES.
●
●
CAUTION:
Utility changes because the Complementary Metal-Oxide Semiconductor (CMOS) could become
corrupted. After you exit the F10 Setup screen, it is safe to disconnect power from the workstation.
26 Chapter 4 System management
F10 key .
If you do not press
F10 again to access the utility. You can also press the
If you have made changes that you do not want applied, select Ignore Changes and then
select F10=YES.
To reset to factory settings, select File>Default setup>Restore Factory Settings as
Default. Press F10 to accept the changes. Select Apply Defaults and Exit. This option
restores the original factory system defaults.
Do not power off the workstation while the ROM is saving your Computer Setup (F10)
F10 at the appropriate time, try again. Turn the workstation off, then
Enter
Ctrl + Alt + Delete
key. In the Computer Setup (F10) Utility
keys before
ENWW