Removing And Replacing Components - HP Xw4600 - Workstation - 2 GB RAM Technical Reference Manual

Table 5-4 System board components (continued)
No.
9 Main power
10 Chassis intrusion switch
11 Password jumper
12 SATA
* Electrically x4 bandwidth

Removing and replacing components

This section provides procedures to remove and install hardware components on your workstation.
Before servicing your workstation, review the safety information and precautions in the
considerations on page
1. Read all safety information and precautions.
2. Locate and clear a suitable work area.
3. Power down the workstation and disconnect power from the workstation.
4. Gather your tools.
5. Service the workstation.
6. Restore power to the workstation.
58 Chapter 5 Removal and replacement procedures
Component No.
21
22
23
24
52, and the Safety and Regulatory Information for your workstation.
Component No.
Front audio 33
Auxiliary audio 34
PCI 32/33 35
PCI Express x16
Component
USB
Parallel
Serial
Service
ENWW