Enclosure Network Configuration Commands - HP BladeSystem bc2000 - Blade PC User Manual

Table 5-3 User Account Commands (continued)
UNASSIGN ADMINSTRA-
TOR (RIGHTS)
<user name>
UNASSIGN USER
<user name> <group name>

Enclosure Network Configuration Commands

Table 5-4
Command
ADD SNMP TRAPRECEIVER
<ip address>
DISABLE SECURESH
DISABLE SNMP
DISABLE TELNET
DISABLE WEB
DOWNLOAD CONFIG
<url>
ENABLE SECURESH
ENABLE SOAP
ENWW
Takes enclosure administrator rights from a user.
Removes the user from the specified group.
Description
Adds an IP address to receive SNMP traps.
Only v1 traps are supported. Traps are directed to the SNMP
default port of 162.
Disables Secure Shell account to the Integrated Administrator. Only enclosure
Disables SNMP support for the Integrated Administrator.
Does not clear the SNMP trap receivers that have been
configured. SNMP trap receivers can still be added and
removed. If SNMP is disabled, Systems Insight Manage
agents do not work properly.
Disables Telnet access to the Integrated Administrator.
Disables HTTP and HTTPS access to the Integrated
Administrator.
This command prevents access to the Web-based user
interface.
The files are auto-executed in script mode. The file is not
allowed to change the password of the Administrator account.
Supported protocols are http, ftp, and tftp. Format the URL
as protocol://host/path/file. If your ftp server does
not support anonymous connections, you can specify a user
name and password by replacing the host part in the previous
format with username:password@host.
Enables Secure Shell account to the Integrated Administrator. Only enclosure
Enables SOAP support for the Integrated Administrator for all
administrator accounts.
permissions only see their
user information.
Only enclosure administrators
may execute this command.
The Administrator account
cannot have enclosure
administrator rights taken
away.
The <user name> is case-
sensitive.
Only enclosure administrators
may execute this command.
The <user name> and <group
name> are case-sensitive.
Restrictions
Only enclosure administrator
may execute this command.
administrators may execute
this command.
Only enclosure
administrators may execute
this command.
Only enclosure
administrators may execute
this command.
Only enclosure
administrators may execute
this command.
Only enclosure
administrators may execute
this command.
The IP address must be in the
form ###.###.###.### where
### ranges from 0 to 255.
administrators may execute
this command.
This does not affect the built-
in SAM user account. See
Operating the Command Line Interface 57