Identifying Integrated Administrator Components; Determining The Integrated Administrator's Initial Ip Address - HP BladeSystem bc2000 - Blade PC User Manual

User guide hp bladesystem pc blade enclosure integrated administrator v4.20
Hide thumbs Also See for BladeSystem bc2000 - Blade PC:
Table of Contents

Advertisement

Identifying Integrated Administrator Components

Each HP PC Blade Enclosure interconnect tray ships with the Integrated Administrator module already
installed and provides external connectivity using two connectors on the rear panel.
Table 3-1
Integrated Administrator Rear Panel Components
Item
1
2
3
4
5
Determining the Integrated Administrator's Initial IP
Address
HP recommends that you connect a local client device, such as a laptop computer, to the console (serial)
connector in order to determine the initial IP address used by the network to recognize the Integrated
Administrator. After using that IP address to access the Integrated Administrator locally using the
console (serial) connector, you can use the Integrated Administrator default values to complete the initial
configuration.
The organization of this section reflects this process:
Requirements for local client devices
Default values for the Integrated Administrator
Determining the IP address using the local console
10
Chapter 3 Getting Started
Description
Management (10/100 Ethernet) connector for remote access through a Web-based user interface, Telnet,
or Secure Shell.
Console (serial) connector for local access to the command line interface using a laptop computer.
Integrated Administrator reset button.
Integrated Administrator health LED
Enclosure Unit Identification button/LED
ENWW

Advertisement

Table of Contents
loading

Table of Contents