HP BladeSystem bc2000 - Blade PC User Manual page 73

(continued)
POWEROFF BAY
<bay number> {[ , | - ] <bay
number>} {FORCE}
POWERON BAY
<bay number> {[ , | - ] <bay
number>} {[PXE | HDD |
RBSU]}
REBOOT BAY <bay
number> {[ , | - ] <bay
number>} {FORCE} {[PXE |
HDD | RBSU]}
SET BAY BOOT FIRST
[HDD | PXE] <bay number>
{[ , | - ] <bay number>}
SET BAY BOOT ONCE
[HDD | PXE | RBSU] <bay
number> {[ , | - ] <bay
number>}
SET BAY UID <bay number>
{[ , | - ] <bay number>} [ON |
OFF]
SHOW BAY INFO [ALL |
<bay number> {[ , | - ] <bay
number>}]
ENWW
Performs a graceful shutdown of the blade PC in the specified
bay.
If the FORCE argument is given, the blade PC is immediately
shut down. This means the blade PC could lose data or
become unstable. If no blade PC is in the specified bay, the
user is told that the bay is empty.
Powers on the specified blade PC.
If no blade PC is in the specified bay, the user is told that the
bay is empty.
The optional boot arguments may require a firmware update
for the BIOS ROM of certain HP blade PCs.
Adding an optional boot argument forces the blade to abandon
the regular boot order and forces a boot using the specified
method.
Sends a request to the blade PC to perform a graceful
shutdown.
The blade PC is then powered on. If no blade PC is in the
specified bay, the user is told that the bay is empty.
The optional boot arguments may require a firmware update
for the BIOS ROM of certain HP blade PCs.
Adding an optional boot argument forces the blade to abandon
the regular boot order and forces a boot using the specified
method.
Sets the IPL for each subsequent reboot. This setting is only
valid for present blades and is cleared if a blade is removed.
This command may require a firmware update for the BIOS
ROM of certain HP blade PCs.
Sets the boot device to be used on the next boot of the bay(s)
specified. This setting is only valid on present blades and is
cleared if the blade is removed.
This command may require a firmware update for the BIOS
ROM of certain HP blade PCs.
Turns a Unit Identification LED on the blade PC on or off.
Displays the following fields: Assigned to group, type, name,
installed operating system, part number, serial number, asset
tag, BIOS version, all CPU types and associated maximum
speeds, memory, NIC #1 MAC, and NIC #2 MAC. For BC2x00
blades, the BMC revision is also displayed. BMC version 22 or
earlier does not provide this information, so it is assumed
version 22h or earlier and indicated as such. When available,
NOTE:
operating system must support
the NMI 'crash dump' feature
or unpredictable results could
occur on the blade. Please
consult with your specific OS
documentation or vendor for
details.
Only enclosure and group
administrators may execute
this command.
Only enclosure and group
administrators may execute
this command.
Only enclosure and group
administrators may execute
this command.
Only enclosure administrators
may execute this command.
Only enclosure and group
administrators may execute
this command.
Only enclosure and group
administrators may execute
this command.
Group members and group
administrators only see
information for the bays in their
groups.
Operating the Command Line Interface
The blade's specific
63