Upgrading The Integrated Administrator Firmware; Recovering A Lost Administrator Password - HP BladeSystem bc2000 - Blade PC User Manual

Disabling Secure Shell causes the users to lose access to the Web-based user interface.
●
To disable telnet communication, type: DISABLE TELNET
●
To disable the SOAP interface, type: DISABLE SOAP

Upgrading the Integrated Administrator Firmware

The firmware associated with the Integrated Administrator can be upgraded remotely using the CLI using
the management (10/100 Ethernet) connector located on the rear panel of the enclosure.
UPDATE IMAGE <url>
The <url> can be any of the following:
●
http://host/path
●
tftp://host/path
●
ftp://username:password@host/path
●
ftp://host/path
...where "host" is a fully qualified domain name or an IP address and path is the pathname of the flash
image to download. Refer to the documentation associated with the firmware upgrade for detailed
information.

Recovering a Lost Administrator Password

To recover a lost Administrator password:
1. Be sure the local client device is properly configured for local access to the Integrated Administrator.
See Chapter 3, in
2. Connect a local client device to the Integrated Administrator (serial) console connector using the
nullmodem serial cable (provided with the enclosure).
3. Open a terminal emulation application.
ENWW
Requirements for Local Client Devices on page
Upgrading the Integrated Administrator Firmware 117
11.