Interconnect Tab - HP BladeSystem bc2000 - Blade PC User Manual

For details concerning specific event log messages, see
event log messages and severity classification.

Interconnect Tab

The Interconnect Tray screen (shown below) allows anyone to view information about the interconnect
tray. It allows enclosure administrators to connect to the remote console of one of the interconnect
switches if installed.
The following table describes the information displayed in the areas that comprise the Interconnect Tray
screen.
Table 4-24 Interconnect Tray Screen Field Descriptions—Interconnect Tray Information Area
Field
Interconnect Tray Information Area
Status
Temperature
Switch A Status
Switch B Status*
ENWW
Possible Values
OK, Degraded, or Failed
OK, Warm, Caution, or Critical
OK, Degraded, or Failed
OK, Degraded, or Failed
Error Messages on page 122
Description
Status of the interconnect tray.
Thermal status of the interconnect tray.
Status of Switch A. This will only be
displayed if an interconnect switch is
installed.
Status of Switch B. This will only be
displayed if an interconnect switch is
installed.
for supported
Interconnect Tab 47