HP BladeSystem bc2000 - Blade PC User Manual page 31

Table 4-1 Enclosure Information Field Descriptions—Status Area (continued)
Enclosure Status
Fan Status
Fan #1—Fan #4
Fan Spare Number
Temperature
Table 4-2 Enclosure Information Field Descriptions—Power Area
Field
Power Area
Power Subsystem Status
Total Capacity
Power Supply #1 and #2 Status
AC Input #1 and #2 Status
Power Supply Spare Number
Table 4-3 Enclosure Information Field Descriptions—General Area
Field
General Area
Enclosure Type
Part Number
Serial Number
Asset Tag
Interconnect Tray Type
Interconnect Tray Part Number
ENWW
OK, Degraded, or Failed.
Redundant or non-redundant.
OK, Standby, Degraded, Failed, or Testing.
Percentage of full fan speed.
OK, Warm, Caution, or Critical.
Possible Values
Redundant or Non-redundant.
Watts.
OK, Degraded, or Failed.
OK, Degraded, or Failed.
Possible Values
Maximum 31 characters including all
alphanumeric, dash, and underscore
characters
HP PC Blade Enclosure Interconnect
Switch
HP PC Blade Enclosure RJ-45
Interconnect Patch Panel
For the default rack name, see
Settings on page 138.
Status of the enclosure.
Redundant: all fans are functional. Non-
redundant: at least one fan is not functional.
Status of fans 1 through 4.
The spare number for the fans installed in the
enclosure.
Enclosure component temperature sensor.
Description
Redundant: both power supplies are
functional. Non-redundant: one power
supply is not functional.
Total capacity of the power supplies.
Status of power supply #1 and power
supply #2.
Status of AC input to power supply #1
and AC input to power supply #2.
The spare number for the power supplies
installed in the enclosure.
Description
Enclosure product type.
Part number for the enclosure.
Serial number for the enclosure.
Asset tag
Only enclosure administrators have write
access to this field.
For the default asset tag value, see
Factory Default Settings on page
Type of interconnect tray.
Part number for the interconnect tray.
Enclosure Tab
Factory Default
138.
21