Virtual Buttons - HP BladeSystem bc2000 - Blade PC User Manual

● Enclosure Average Supply Input Power—The immediate average power consumption averaged
over the last 5 second sample interval.
●
Enclosure Average Supply Input Power 24-Hour Sample Intervals—This is a rolling average
of power consumption over the course of preceding last 24 hours of uptime.
●
Enclosure Peak Supply Input Power 24-Hour Sample Intervals—This is the peak of power
consumption over the course of the preceding 24 hours of uptime.
●
Enclosure Average Supply Input Power Time Averaged Since Powered—This is the power
consumption averaged over the total uptime for the IA. This is since the previous power cycle or
IA reset.
●
Enclosure Peak Supply Input Power Time Averaged Since Powered—This is the peak of power
consumption over the total uptime for the IA. This is since the previous power cycle or IA reset.
NOTE: All statistics are calculated from the time of the last reboot, up to 24-Hours.

Virtual Buttons

NOTE: Only enclosure administrators can execute these commands.
The Virtual Buttons screen (shown below) enables an enclosure administrator to modify the power state
of the enclosure and Unit Identification LED from a remote location to facilitate troubleshooting by
technicians in the data center.
28 Chapter 4 Web Browser Interface ENWW