HP BladeSystem bc2000 - Blade PC User Manual page 70

(continued)
SET DATE
MMDDhhmm
{{CC}YY} {TZ}
SET ENCLOSURE ASSET
{TAG}
<asset tag>
SET ENCLOSURE NAME
<enclosure name>
SET ENCLOSURE UID [ON |
OFF]
SET RACK NAME
<rack name>
SHOW CONFIG
60 Chapter 5 Command Line Interface
Sets the date of the enclosure with the following definitions:
●
MM: month
●
DD: day
●
hh: hour (24-hour format)
●
mm: minute
●
CC: century
● YY: year
●
TZ: time zone (case-sensitive)
If the time zone is left blank, the current time is left in effect.
Changes the enclosure asset tag
Changes the enclosure name
Turns the enclosure Unit Identification LED on or off
Sets the name for the rack where that enclosure resides
Displays the script required to recreate the settings of the
enclosure
Passwords are not included for any user.
Only enclosure administrators
may execute this command.
● MM is an integer from
1-12
●
DD is an integer from
1-31
● hh is an integer from
0-23
●
mm is an integer from
0-59
For a list of time zones, see
Time Zone Settings
on page 141. NTP must be
disabled before manually
setting the date and time.
Only enclosure administrators
may execute this command.
The <asset tag> must be 1-31
characters long and can
include alphanumeric, dash,
and underscore characters.
The default enclosure asset
tag is blank. To set a blank
asset tag, specify the blank
value using the quotes.
Only enclosure administrators
may execute this command.
The <enclosure name> must
be 1-32 characters long and
can include alphanumeric,
dash, and underscore
characters. <
The default enclosure name is
IA-MAC, where MAC is
replaced with the actual MAC
address.
Only enclosure administrators
may execute this command.
Only enclosure administrators
may execute this command.
The <rack name> must be
1-32 characters long and can
include alphanumeric, dash,
and underscore characters.
The default rack name is
UnnamedRack.
Only the enclosure
administrators may execute
this command.
ENWW