Adding A User - HP BladeSystem bc2000 - Blade PC User Manual

5. To add existing users to this group:
a. Select users in the User Names area.
b. Click Add User [View] or Add User [View/Modify]. For more information on permission
levels, see
6. Click Apply.
To create a group using the CLI, type the following commands sequentially:
ADD GROUP <group name>
NOTE: The <group name> must be unique to all other group names and user names and is case-
sensitive. It must be 1-13 characters long and can include all alphanumeric characters, the dash, and
the underscore.
SET GROUP {DESCRIPTION} <group name><description>
NOTE: The <description> must be 1-20 characters long and can include all alphanumeric characters,
the dash, the underscore, and spaces.
ASSIGN BAY [ALL | <bay number> {[ , | - ]<bay number>}] <group name>
ASSIGN USER <user name> <group name> {[VIEW | MODIFY]}
NOTE: The <use name> and <group name> are case-sensitive. The Administrator account cannot be
added to a group. The default setting is View.

Adding a User

NOTE: Restricted default names of group and user accounts are not case-sensitive. Nondefault group
and user names are case-sensitive.
ENWW
User Permissions on page 72 in this chapter.
Setting Up User Accounts 79