Remote Console - HP BladeSystem bc2000 - Blade PC User Manual

Table 4-14 Bay Information Field Descriptions—Status Area (continued)
Thermal Condition
Enclosure Name
Table 4-15 Bay Information Field Descriptions—General Area
Field
General Area
Blade PC Type
Blade PC Installed OS
Spare Number
Serial Number
Asset Tag
BIOS Version
CPU # Type
CPU # Max Speed
Installed RAM
NIC #1 and #2 MAC Addresses
BMC Revision

Remote Console

Enclosure administrators and group administrators with access to the bay can click Remote Console
to open a remote text-based console (shown below) to the blade PC in the bay.
NOTE: Click on the command windows to assure it has focus, otherwise no commands can be entered.
34 Chapter 4 Web Browser Interface
OK, Warm, Caution, or Critical
Possible Values
mm/dd/yy
##:##:##:##:##:##, where ## ranges
from 00 to FF.
00 to FF
Thermal condition of the blade.
NOTE: In the case of a thermal critical
or caution condition, BC2x00 blades
provide thermal measurements for the
CPU, Graphics processor, and ambient
sensors in degrees Celsius at the time of
failure detection.
Name of enclosure.
For the default enclosure name, see
Factory Default Settings on page
Description
Product name of the blade PC.
Operating system installed on the blade
PC.
Spare number of the blade PC.
Serial number of the blade PC.
Asset tag number of the blade PC.
ROM version on the blade PC.
Type of processor on the blade PC.
Speed associated with the blade PC
processor.
Amount of memory installed on the blade
PC.
MAC address of the NIC 1 interface and
the NIC 2 interface.
BMC Revision: For BC2x00 blades, the
Blade Management Controller (BMC)
revision will be posted here. The BMC
versions prior to version 23 do not report
this value. N/A will be shown in
parentheses. Future versions of the BMC
will provide this information.
138.
ENWW