User Permissions - HP BladeSystem bc2000 - Blade PC User Manual

◦
Enabling NTP
◦
Disabling NTP
●
Configuring SNMP support
◦ Entering a community string
◦
Modifying the system location
◦
Modifying the system contact information
◦
Adding trap targets
◦
Removing trap targets
For a detailed explanation of the command line conventions used in this document, see
Conventions on page
These procedures are supported by the Web-based user interface and the CLI unless otherwise noted.
NOTE: Most of these tasks are limited to a subset of users. For more information on who can perform
each task, see

User Permissions

The group-centered approach of Integrated Administrator to user permissions facilitates the
maintenance of user groups and groups of blade PC bays. This approach operates according to the
following principles:
●
A blade PC bay is assigned exclusively to one group only.
●
A group can be assigned many blade PC bays.
●
A user can have various permission levels within any number of groups.
●
Access to a blade PC by users or groups depends on the rights assigned to the blade PC bay in
which the blade PC is installed.
Use the following table to distinguish the various permission levels available from the HP PC Blade
Enclosure Integrated Administrator.
Table 6-1 HP PC Blade Enclosure Integrated Administrator Permissions Levels
Title
Enclosure Administrator
72 Chapter 6 Setting Up the System
121.
User Permissions on page 72
Account Type
Administrator
and the section describing that task in this chapter.
Permissions Description
View/Modify for all Enclosure administrators may maintain blade
groups in the enclosure PC bay privileges, manage the enclosure,
manage blade PC bays, and create and
maintain groups.
One special enclosure administrator account
(named Administrator) cannot be deleted,
disabled, or stripped of enclosure
administrator permissions. No other enclosure
administrator may change the password to this
account.
Enclosure administrators cannot disable or
delete their own accounts.
Command Line
ENWW