Network Configuration - HP BladeSystem bc2000 - Blade PC User Manual

Only enclosure administrators have access to the Date and Time information. If those fields are not
being modified, the Integrated Administrator updates these fields every 20 seconds. If automatic time
configuration is enabled, the date and time fields are grayed out and cannot be modified.
If you select Other for time zone, use the following window to set a user-defined time zone:
Three buttons appear on this window:
●
Apply—Applies the new time zone.
●
Reset—Clears the time zone text box.
●
Cancel—Cancels all changes and closes the window.
For more information on accepted time zones, refer to

Network Configuration

NOTE: Only enclosure administrators have access to these settings.
The Network Configuration screen (shown below) enables the enclosure administrator to modify the
network settings of an enclosure. These settings are specific to the enclosure and do not affect the
network configurations for blade PCs.
ENWW
Time Zone Settings on page 141.
Enclosure Tab 23