HP BladeSystem bc2000 - Blade PC User Manual page 64

Table 5-3 User Account Commands (continued)
ADD USER
<user name>
{<password>}
ASSIGN ADMINSTRA- TOR
(RIGHTS)
<user name>
ASSIGN BAY
[ALL | <bay number> {[ , | - ]
<bay number>}] <group
name>
ASSIGNS USER
<user name>
<group name>
{[VIEW | MODIFY]}
54 Chapter 5 Command Line Interface
Adds a user to the system
If a password is not given, the user is prompted for one. If
SCRIPT MODE is enabled, the password is not optional and
must be provided.
Promotes a user to have enclosure administrator permissions.
Group membership is not detected in case of enclosure
administrator rights are removed at a later time.
Assigns one or more bays to a group.
If a bay is already assigned to a group, it must first be
unassigned before executing this command.
Assigns a user to a group with View rights (for group members)
or View/Modify rights (for group administrators)
If View or View/Modify is not specified, View is chosen by
default.
include alphanumeric, dash,
and underscore characters. It
must begin with a letter.
NOTE: "Administrator,"
switch," switcha, "switchb,"
"SAM," and "all" are reserved
names and cannot be used.
This restriction is not case-
sensitive.
See Factory Default Settings
on page 138 for factory
default groups accounts.
Only enclosure administrators
may execute this command. A
maximum of 25 users may be
added in addition to the
reserved accounts.
The <user name> must be
unique to all other group
names and user names and is
case-sensitive. It must be
1-13 characters long and can
include alphanumeric, dash,
and underscore characters. It
must begin with a letter.
The <password> must be 3-8
characters long and includes
all printable characters. If a
password is not entered, the
user is prompted for one.
NOTE: "Administrator,"
switch," switcha, "switchb,"
"SAM," and "all" are reserved
names and cannot be used.
This restriction is not case-
sensitive.
See Factory Default Settings
on page 138 for factory
default user accounts.
Only enclosure administrators
may execute this command.
The <user name> is case-
sensitive.
Only enclosure administrators
may execute this command.
The <group name> is case-
sensitive.
Only enclosure administrators
may execute this command.
The <user name> is case-
sensitive.
ENWW