HP BladeSystem bc2000 - Blade PC User Manual page 30

The following illustration shows the information presented on the Enclosure Information screen (status
area, one of six shown).
The Enclosure Information screen enables an enclosure administrator to update the rack name,
enclosure name, asset tag, time zone, date, and time, as well as observe the status and general
information for every component in the enclosure.
Two buttons appear on the Enclosure Information screen:
●
Apply—Saves changes made to the screen.
●
Cancel—Restores all fields on the screen to their original values.
The following table describes the information displayed in the areas that comprise the Enclosure
Information screen.
Table 4-1 Enclosure Information Field Descriptions—Status Area
Field
Status Area
Enclosure Name
Rack Name
20 Chapter 4 Web Browser Interface
Possible Values
Maximum 32 characters including all
alphanumeric, dash, and underscore
characters.
Maximum 32 characters including all
alphanumeric, dash, and underscore
characters.
Description
Name of enclosure.
Only enclosure administrators have write
access to this field.
For the default enclosure name, see
Default Settings on page 138.
Name of rack.
Only enclosure administrators have write
access to this field.
Factory
ENWW