Blade Pc Bay Management Commands - HP BladeSystem bc2000 - Blade PC User Manual

(continued)
UPLOAD CONFIG
<url>
For system log severity policy specific settings, these are global and set by the administrator account only. These were added
to provide granular control over a specific classification of system log message severity types.
●
SET SYSLOG POLICY ENCLOSURE
◦
SET SYSLOG POLICY ENCLOSURE ALL [ ON | OFF ]
◦
SET SYSLOG POLICY ENCLOSURE INFORMATIONAL [ ON | OFF ]
◦ SET SYSLOG POLICY ENCLOSURE MAJOR [ ON | OFF ]
◦
SET SYSLOG POLICY ENCLOSURE MINOR [ ON | OFF ]
◦ SET SYSLOG POLICY ENCLOSURE NORMAL [ ON | OFF ]
●
SET SYSLOG POLICY BAY
◦ SET SYSLOG POLICY BAY ALL [ ON | OFF ]
◦
SET SYSLOG POLICY BAY INFORMATIONAL [ ON | OFF ]
◦ SET SYSLOG POLICY BAY MAJOR [ ON | OFF ]
◦
SET SYSLOG POLICY BAY MINOR [ ON | OFF ]
◦ SET SYSLOG POLICY BAY NORMAL [ ON | OFF ]

Blade PC Bay Management Commands

Table 5-6
Command
CLEAR BAY BOOT [FIRST |
ONCE | ALWAYS] [ALL | <ay
number> {[ , | - ] <bay
number>}]
CLEAR SESSION BAY
<bay number>
CONNECT BAY
<bay number>
GENERATE NMI
<bay number>
62 Chapter 5 Command Line Interface
Upload the current runtime configuration to the specified FTP
or TFTP server.
Description
Clears the setting for the IPL to be passed to the blade at the
next reboot. The FIRST argument resets the IPL for all
subsequent reboots. The ONCE argument resets the IPL for
the next reboot only. The Always argument resets the IPL for
every reboot. This command is only valid for present blades.
This command may require a firmware update for the BIOS
ROM of certain HP blade PCs.
Terminates a Terminal session from the enclosure.
This is not a graceful termination. The connected user loses
any unsaved work.
Opens a remote console session to the blade PC with that
blade PC bay number.
A blade PC can only support one remote console session at a
time.
Generates an NMI on the specified blade.
The consequences of an NMI are operating system specific.
pathname of the flash
image to download
Only enclosure administrators
may execute this command.
Restrictions
Only enclosure administrators
may execute this command.
Enclosure administrators may
execute this command for
blade PC bays and the
interconnect switch.
Only enclosure and group
administrators may execute
this command.
Only enclosure and group
administrators may execute
this command.
ENWW