Enclosure Network Configuration Commands; Add Oa Dns; Add Snmp Trapreceiver; Add Sshkey - HP Xw460c - ProLiant - Blade Workstation User Manual

Enclosure network configuration commands

ADD OA DNS

•
Command:
ADD OA DNS [<bay number>] <ip address>
•
Description:
Adds an IP address of a DNS server to the list. DNS servers are used if the system is configured to
use a static IP address.
If a bay number is not specified, the command defaults to the active Onboard Administrator.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
A maximum of two DNS servers can be added.
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.

ADD SNMP TRAPRECEIVER

•
Command:
ADD SNMP TRAPRECEIVER <ip address> ["<community name>"]
•
Description:
Adds an IP address to receive SNMP traps. Traps are directed to the SNMP default port 162. The
default trap community string is public.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
A maximum of eight IP addresses can be added to receive SNMP traps.
Only v1 traps are supported.
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.

ADD SSHKEY

•
Command:
ADD SSHKEY <end marker> <certificate> <end marker>
•
Description:
Adds an SSH key or keys to the Administrator local account. Multiple SSHKEYs can be concatenated
in the string.
Enclosure network configuration commands 53