Bay Information - HP BladeSystem bc2000 - Blade PC User Manual

Table 4-12 Bay List Field Descriptions
Field
Bay #
UID
Blade PC Name
Assigned to Group
Status
The following table lists permissions that are related to the action buttons of the Bay List screen
Table 4-13 Bay List Action Buttons and Permissions
Field
View/Modify
Remote Console
Console Log
View Group
Bay Assignment

Bay Information

NOTE: Be sure the Integrated Administrator displays up-to-date blade PC information by rebooting
the blade PC after installing the blade PC health service. The blade PC may need to be rebooted a
second time to fully update the Integrated Administrator.
The Bay Information screen (shown below) enables an enclosure administrator to observe the status
and general information for a blade PC in a given blade PC bay. Group administrators and group
members with View rights to the blade PC bay can also observe this information.
32 Chapter 4 Web Browser Interface
Possible Values
1-20
OK, Degraded, or Failed
Possible Values
Opens the Blade Information screen.
Opens the Remote Console screen.
Opens the Console Log screen.
Opens the View/Modify Group screen.
Opens the Bay Assignment dialog box.
NOTE: If a blade PC is to be re-
assigned, it must be unassigned first.
Description
Blade PC number.
Displays a blue circle if the unit
identification (UID) LED of the blade is lit.
Name of the blade PC in that blade PC
bay as defined by the operating system
of the blade PC.
NOTE: The blade PC health service
must be installed for the Integrated
Administrator to obtain the blade PC
name and operating system type.
Name of the group that owns that bay.
The status and power state of the blade
PC.
Description
Enclosure administrators, group
administrators, and group members with
permissions.
Enclosure administrators, and group
administrators with permissions.
Enclosure administrators, group
administrators, and group members with
permissions.
Enclosure administrators only.
Enclosure administrators only.
ENWW