Disabling And Deleting User Accounts - HP BladeSystem bc2000 - Blade PC User Manual

5. Select the appropriate check boxes for the available blade PC bays that reflects the updated rights
you wish to give the group.
6. Click Apply.
To modify rights to blade PC bays for an existing group using the CLI, choose from among the following
commands:
NOTE: Only enclosure administrators may execute these commands.
●
To expand the number of blade PCs assigned to a group, type:
ASSIGN BAY [ALL | <bay number> {[ , | - ]<bay number>}] <group name>
If a blade PC bay is currently assigned to a group, this command re-assigns the bay from its current
group to the new group.
●
To remove access rights to blade PC bays for any group, type:
UNASSIGN BAY [ALL | <bay number> {[ , | - ] <bay number>}]

Disabling and Deleting User Accounts

NOTE: Only enclosure administrators may execute this command. Group accounts can be deleted,
but cannot be disabled.
To disable a user account using the Web-based user interface:
1. Click the Administration tab.
2. Click on User List in the left panel.
3. Select the user whose account you wish to disable from the user list.
ENWW Managing Users 107