Supported Soap Interface Commands - HP BladeSystem bc2000 - Blade PC User Manual

User guide hp bladesystem pc blade enclosure integrated administrator v4.20
Hide thumbs Also See for BladeSystem bc2000 - Blade PC:
Table of Contents

Advertisement

Supported SOAP Interface Commands

The following table contains a summary of the supported SOAP interface commands a short description:
Command
userLogin
userLogout
modifyPassword
getEnclosurePowerCollectionInfo
setEnclosurePowerCollectionInfo
getEnclosurePowerRecords
getBladePowerCollectionInfo
setBladePowerCollectionInfo
getBladePowerRecords
getEnclosureInfo
getIAInfo
getEnclosureStatus
setBladePowerState
getBladePowerState
getBladeStatus
getBladeStatusArray
getBladeInfo
getEnclosurePowerData
A future specification will contain the XML schema and description for these commands. Please refer
to it for further details.
90
Chapter 7 Configuring SOAP Support Tasks
Description
Establishes a SOAP session with the IA for using SOAP interface web services.
userLogout Closes a SOAP session with the IA.
Change user account password via SOAP interface.
Gets information about the power regulator and power reporting capabilities of the
enclosure.
Sets information about the power regulator and power reporting capabilities of the
enclosure. Allows setting of a 1 minute, 5 minute, 10 minute, 1 hour, or for 24 hour sample
rate.
Returns collected power history data points for the enclosure.
Gets information about the power regulator and power reporting capabilities of a given bay.
Sets information about the power regulator and power reporting capabilities of a given bay.
Allows setting of a 1 minute, 5 minute, 10 minute, 1 hour, or for 24 hour sample rate.
Returns collected power history data points for the a given bay.
Functions like CLI Get Enclosure Info command minus some IA specific information.
Gets IA specific information.
Functions like CLI Get Enclosure Status command.
Functions like CLI power[on / off] {bay #} command.
Gets the power state of the blade.
Functions like CLI Get Blade Status {bay #} command.
Functions like CLI Get Blade Status All command.
Functions like CLI Get Blade Info {bay #} command.
Provides a snapshot of the most recent power data points collected.
ENWW

Advertisement

Table of Contents
loading

Table of Contents