Modifying Radio Settings; Figure 18 - Modify Radio Settings - D-Link DWL-2600AP Administrator's Manual

Unified Access Point Administrator's Guide
information. The DWS-4000 Series switch does not communicate with the AE.
AeroScout tags operate only in 802.11b/g mode. Therefore, network administrators who use the AeroScout tags must
configure at least one radio on APs that are expected to detect tags in either 802.11b/g or 802.11b/g/n mode. The
radios configured in 2.4 GHz IEEE 802.11n mode cannot detect AeroScout tags.
Note: The following notes apply to AeroScout product and protocol support:
•) D-Link does not sell AeroScout products. Contact AeroScout for AeroScout hardware,
•) The AE protocol does not support any authentication or encryption between the AE server
•) The AE protocol requires radios to operate in promiscuous mode. This means that the AP

Modifying Radio Settings

Radio settings directly control the behavior of the radio devices in the AP and its interaction with the physical medium;
that is, how and what type of electromagnetic waves the AP emits.
To specify radio settings, click the Radio tab in the Manage section.
Different settings display depending on the mode you select. All settings are described in the table below.
The following table describes the fields and configuration options for the Radio Settings page.
Field
Radio
Status (On/Off)
January 2015
software or deployment information.
and the access point.
receives and processes all packets detected by the radios, as opposed to processing only
packets destined to the APs BSSID. This can affect AP throughput.

Figure 18 - Modify Radio Settings

Description
Select Radio 1or Radio 2 to specify which radio to configure. The rest of the settings on this
page apply to the radio you select in this field. Be sure to configure settings for both radios.
Radio 1 operates in the 5 GHz band (802.11a/n), and Radio 2 operates in the 2.4 GHz band
(802.11b/g/n).
Specify whether you want the radio on or off by clicking On or Off.
If you turn off a radio, the AP sends disassociation frames to all the wireless clients it is
currently supporting so that the radio can be gracefully shutdown and the clients can start
the association process with other available APs.
Section 4 - Managing the Access Point
Unified Access Point Administrator's Guide
Page 40