Adding And Removing Admin Domain Members; Renaming An Admin Domain - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Adding and removing Admin Domain members

Use the following procedures to add or remove members of an Admin Domain.
NOTE: If you remove the last member of an Admin Domain, that Admin Domain is automatically deleted.
To add members to an existing Admin Domain:
1. Connect to an AD-aware switch and log in as admin.
2. Switch to the AD255 context, if you are not already in that context.
ad --select 255
3. Enter the ad
-s option to specify switch members:
ad --add ad_id -d "dev_list" -s "switch_list"
where ad_id is the Admin Domain name or number, dev_list is a list of device WWNs or domain,port
members, and switch_list is a list of switch WWNs or Domain IDs.
4. To end the transaction now, enter ad
apply to save the Admin Domain definition and directly apply the definitions to the fabric.
ad
--
The following example adds two switch ports, designated by domain,port, to Admin Domain AD1.
sw5:AD255:admin> ad --add AD1 -d "100,5; 4,1"
To remove members from an Admin Domain:
1. Connect to the switch and log in as admin.
2. Switch to the AD255 context, if you are not already in that context.
ad --select 255
3. Enter the ad
the -d option to specify switch members:
ad --remove ad_id -d "dev_list" -s "switch_list"
where ad_id is the Admin Domain name or number, dev_list is a list of device WWNs or domain,port
members, and switch_list is a list of switch WWNs or Domain IDs.
Removing the last member element of an Admin Domain deletes the Admin Domain.
4. To end the transaction now, enter ad
apply to save the Admin Domain definition and directly apply the definitions to the fabric.
ad
--
The following example removes port 5 of domain 100 and port 3 of domain 1 from AD1.
sw5:AD255:admin> ad --remove 1 –d "100,5; 1,3"
The following example removes switch 100 from the membership list of AD4.
sw5:AD255:admin> ad --remove 4 –s "100"

Renaming an Admin Domain

Use this procedure if you want to change the name of an Admin Domain. You can also change
auto-assigned names (ADn).
To rename an Admin Domain:
1. Connect to the switch and log in as admin.
2. Switch to the AD255 context, if you are not already in that context.
ad --select 255
3. Enter the ad
ad --rename present_name new_name
156 Managing administrative domains
add command using the -d option to specify device and switch port members and the
--
--
remove command using the -d option to specify device and switch port members and
--
--
rename command with the present name and the new name.
--
save to save the Admin Domain definition or enter
save to save the Admin Domain definition or enter