Zoning Edit; Zoning Database Parameters - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

zoning edit

Description Opens a Zoning Edit session for the non-volatile zoning database or merged zone set in which to
create and manage zone sets and zones.
Authority Admin session
Syntax
zoning edit [database]
Operands
[database]
Opens an edit session for the zoning database given by [database]. If you omit [database], an
edit session for the non-volatile zoning database is opened.
database parameters
Table 73

Zoning database parameters

Parameter
configured
merged
Examples The following is an example of the zoning edit command:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> zoning edit
8/20q FC Switch (admin-zoning) #>
.
.
8/20q FC Switch (admin-zoning) #> zoning save
The changes have been saved; however, they must be activated
before they can take effect -- see Zoneset Activate command.
See also zone, page 293
zoneset, page 296
zoning cancel, page 299
Description
Opens a zoning edit session for the non-volatile zoning database.
Opens a zoning edit session for the temporary, merged zone set received
from another switch.
8/20q Fibre Channel Switch command line interface guide 303
Table 73 describes the zoning