Displaying 802.1X Configuration, Statistics, And Counters; Show Commands For Port-Access Authenticator - HP procurve switch 2650 Access Security Manual

Displaying 802.1x Configuration,
Statistics, and Counters
802.1x Authentication Commands
802.1x Supplicant Commands
802.1x-Related Show Commands
show port-access authenticator below
show port-access supplicant
RADIUS server configuration

Show Commands for Port-Access Authenticator

Syntax: show port-access authenticator
Shows whether port-access authenticator is active (Yes
or No) and the status of all ports configured for 802.1x
authentication. The Authenticator Backend State in this
data refers to the switch's interaction with the authen-
tication server.
[ e ] < port-list >
config
Configuring Port-Based Access Control (802.1x)

Displaying 802.1x Configuration, Statistics, and Counters

page 5-10
page 5-17
page 5-23
pages 5-14
Same as above, but limits port status to only
thespecified port. The statistics values are blank
if thespecified port is not enabled as an authen-
ticator.
Shows whether port-access authenticator is
active and the 802.1x configuration of the speci-
fied port. The configuration settings are blank if
the specified port is not enabled as an authenti-
cator.
5-21