Responding To Error Messages - Kyocera 255b Operation Manual

Troubleshooting > Responding to Error Messages

Responding to Error Messages

If the touch panel displays any of these messages, follow the corresponding procedure.
A
Error Message
Acceptable staple count
exceeded.*
Add the following paper in
cassette #.
Add the following paper in the
multi purpose tray.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
B
Error Message
Box limit exceeded.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
C
Error Message
Cannot connect to Authentication
Server.*
Checkpoints
Is the acceptable staple count
exceeded? For details, refer to
Document Finisher (option) on
page 11-22.
Is the indicated cassette out of
paper?
Is the paper of the selected size
loaded in the multi purpose tray?
Does the paper size set for the
paper source matches the paper
size that was actually loaded?
Checkpoints
—
Checkpoints
—
—
—
—
10-12
Corrective Actions
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job.
Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source.
Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source.
Press [Continue] to continue printing.
Press [Cancel] to cancel the job.
Corrective Actions
Document box is full, and no further
storage is available; Job is canceled.
Press [End]. Try to perform the job again
after printing or deleting data from the
Document box.
Corrective Actions
Set machine time to match the server's
time.
Check the domain name.
Check the host name.
Check the connection status with the
server.
Reference
Page
—
3-3
3-5
—
Reference
Page
—
Reference
Page
9-23
9-27
9-27
—