Responding To Error Messages - Kyocera FS-C2026MFP Operation Manual

Responding to Error Messages

If the control panel displays any of these messages, follow the corresponding procedure.
If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the
following pages. If the problem persists, contact your Service Representative.
Alphanumeric
Error Message
Load paper in cassette
1.
Load paper in MP
Tray.
Toner is running out.
[C], [M], [Y], [K]
Add toner.
[C], [M], [Y], [K]
Check waste toner
box.
Cannot connect to
Authentication Server.
Cannot duplex print
on this paper.
Incorrect account ID.
Job is canceled.
Close top (rear or left)
cover.
Close Document
Processor.
Downloaded From ManualsPrinter.com Manuals
Checkpoints
Is the indicated cassette out
of paper?
Is the paper of the selected
size loaded in the multi
purpose tray?
–
Is the waste toner box full?
Is the waste toner box
installed?
–
Did you select a paper size/
media type that cannot be
duplex printed?
–
Is there any cover which is
open?
Is the document processor
open?
Is the top cover of the
document processor open?
Corrective Actions
Load paper.
Load the paper in the multi purpose
tray which is of the size and type
indicated on the Message Display.
It is almost time to replace the toner
container. After a certain number of
pages (about 20) are printed, printing
will stop. Obtain a new toner
container of the color indicated in [].
Replace the toner container. Replace
with a toner container of the color
indicated in [].
Replace the waste toner box.
Install the waste toner box in the
machine.
Press the OK key and check the
following items:
• Registration to Authentication
Server
• Password and computer address
for Authentication Server
• Connection of Network
Select the available paper type.
Press the OK key to print without
using Duplex.
This job is canceled because it is
restricted by Job Accounting. Press
the OK key.
Close the cover indicated on the
control panel.
Close the document processor.
Close the top cover of the document
processor.
10-7
Troubleshooting
Reference
Page
2-27
2-30
9-4
9-4
9-6
10
9-6
—
3-16
—
—
—
2-45