Responding To Error Messages - Kyocera FS-1024MFP Operation Manual

Responding to Error Messages

If the control panel displays any of these messages, follow the corresponding procedure.
Alphanumeric
Error Message
Load paper in cassette
1.
Load paper in MF Tray. Is the paper of the selected
Toner is running out.
Add toner.
Close front cover.
Close Document
Processor.
Machine failure.
Call service.
Memory is full.
Print job cannot be
processed
completely.
OPERATION GUIDE
Checkpoints
Is the indicated cassette out
of paper?
size loaded in the Manual
Feed Tray?
–
–
Is there any cover which is
open?
Is the document processor
open?
Is the top cover of the
document processor open?
–
Is Error code "C4200"
displayed?
–
Corrective Actions
Load paper.
Load the paper in the Manual Feed
Tray which is of the size and type
indicated on the Message Display.
Prepare the toner container.
Replace the toner container.
Close the cover indicated on the
control panel.
Close the document processor.
Close the top cover of the document
processor.
Internal error has occurred. Make a
note of the error code displayed on
the Message Display. Turn off the
machine, unplug the power cord, and
contact your Service Representative.
Internal condensation has occurred
as a result of a sudden change in
temperature. Turn off the machine
and let stand for 30 to 90 minutes,
and then back on again. If this
message still remains, turn off the
machine, unplug the power cord, and
contact your Service Representative.
Unable to continue the job as the
memory is used up.
Press the OK key to print the
scanned pages. The print job cannot
be processed completely.
Press the Stop key to cancel the job.
Troubleshooting
Reference
Page
2-17
2-20
9-5
9-5
—
—
2-30
—
10
—
—
10-5