Table of Contents
Advertisement
Chapter 6
Show Commands
show ip
To display IP configuration data, enter the show ip command in User Exec mode or Privileged Exec
mode.
Syntax Description
address-table
route
http
server secure
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Use this command to view the results of the ip command.
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-only user.
Examples
The example below shows the output of the show ip address-table command. Note that port 0 always
indicates the gateway port of the interface card.
SFS-7000P# show ip address-table
===============================================================
===============================================================
port
----------------------------------------------------------------------------
4/0
4/1
4/2
SFS-7000P#
OL-9163-02
show ip [address-table | route | http [server secure]]
(Optional) This keyword displays the address information of Ethernet
interface ports, Ethernet interface cards, and InfiniBand interface cards. It
lists the IP addresses, netmasks, broadcast formats, reassembly sizes, and
whether or not the IP address is a primary or backup.
(Optional) This keyword displays the Classless Inter-Domain Routing
(CIDR) forwarding records or routes (both static and dynamic) of all IP
routes to system ports. Included in this information are the route
destination, route type, route protocol, next hop, and port used.
(Optional) Displays current HTTP settings.
(Optional) Displays current secure HTTP server settings.
address
mask
192.168.2.1
255.255.255.0
192.168.1.1
255.255.255.0
192.168.3.1
255.255.255.0
IP Address Table
bcast-addr reasm
format
max-size
1
0
1
0
1
0
Cisco SFS 7000 Series Product Family Command Reference Guide
type
status
primary
active
primary
active
primary
active
show ip
6-183
Advertisement
Table of Contents
