Table of Contents
Advertisement
Chapter 6
Show Commands
show power-supply
To display the status of the power supplies on your Server Switch, enter the show power-supply
command in User Exec mode or Privileged Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012
Privilege Level:
General read-only user.
Use this command to monitor the power supply. This command primarily serves to help management
tools continuously monitor power supply status. Errors in the ts_log file may prompt you to check power
supply status.
Table 6-78
Field
type
oper-status
utilization
voltage
product serial-number
pca serial-number
pca number
fru number
OL-9163-02
show power-supply
Table 6-78
describes the power-supply fields.
show power-supply Command Field Descriptions
Description
Indicates AC power.
Displays "up" or "down" to indicate the status of the power supply.
Displays percentage of power utilization when multiple power supplies
provide power. Displays "n/a" when one power supply runs.
Voltage of the power supply.
Factory-assigned product serial number.
Printed circuit assembly (PCA) serial number.
Printed Circuit Assembly (PCA) assembly number.
Field replaceable unit (FRU) number for the actual switch (select chassis) or
chassis (select chassis).
Cisco SFS 7000 Series Product Family Command Reference Guide
show power-supply
6-193
Advertisement
Table of Contents
