Show Version - Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 Command Reference Manual

show version

show version
This command provides the software version, contact information, system up-time, time of last
configuration change, and the last action performed on the Server Switch. To display a general,
high-level description of your Server Switch, enter the show version command in User Exec mode or
Privileged Exec mode.
Syntax Description This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output:
Table 6-82
Table 6-82
Field
system-version
contact
name
location
up-time
last-change
last-config-save
action
Cisco SFS 7000 Series Product Family Command Reference Guide
6-212
show version
describes the fields in the command output.
Show Version Command Field Descriptions
Description
OS version that the Server Switch runs.
Displays the contact information that you configure with the
snmp-server command. See
page 2-66.
Displays the device name that you configure with the hostname
command. See the"hostname" section on page
Displays the location information that you configure with the
snmp-server command. See the
page 2-66.
Amount of time since last boot.
Date and time of last configuration change.
Date and time that an administrator last saved the running
configuration.
Executed action. See the "action" section on page
Chapter 6 Show Commands
the"snmp-server" section on
2-41.
"snmp-server" section on
2-3.
OL-9163-02