Table of Contents
Advertisement
Chapter 6
Show Commands
show ib pm connection counter
To view the performance monitoring counters on all ports on a connection, enter the show ib pm
connection counter command in User Execute mode or Privileged Execute mode.
Syntax Description
subnet-prefix
prefix
src-lid
source
dst-lid
destination
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output Description:
subnet-prefix
node-guid
port-num
chassis-guid
slot-num
ext-port-num
data-is-valid
symbol-errors
link-recovery-errors
link-downs
rcv-errors
OL-9163-02
show ib pm connection counter subnet-prefix prefix src-lid source dst-lid destination
Specifies the subnet prefix of the InfiniBand subnet for which you want to
view performance monitoring.
Subnet prefix of the InfiniBand subnet for which you want to view
performance monitoring
Specifies the source Local Identifier (LID) of the connection.
Source LID of the connection
Specifies the destination LID of the connection.
Destination LID of the connection.
Subnet to which the connection belongs
GUID of the node belonging to the connection
Port number on the node belonging to the connection.
GUID of the chassis to which the port belongs (if available)
Slot number on the chassis to which the port belongs (if available)
Port number on the chassis slot to which the port belongs (if available)
If the value is false, re-run the command to obtain valid data
Symbol error counter
Link Error Recovery counter
Link Downed counter
Port Receive Error counter
Cisco SFS 7000 Series Product Family Command Reference Guide
show ib pm connection counter
6-83
Advertisement
Table of Contents
