Table of Contents
Advertisement
Chapter 3
Fibre Channel Commands
fc srp target
To configure targets, enter the fc srp target command in Global Configuration mode. To delete a target
from the running configuration, use the no form of this command.
Syntax Description
wwpn
description
desc
ioc-guid
guid
service-name
Defaults
The service name serves as the default target name.
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user or Fibre Channel read-write user.
Use the fc srp target command to configure target attributes.
We recommend that you allow your gateway cards to detect targets. We recommend that you let your
gateway card(s) detect targets. A gateway card automatically creates FC-SRP target entries when it
discovers targets.
Examples
The following example assigns a name to identify the target easily:
SFS-7000P(config)# fc srp target 21:00:00:04:cf:75:6b:3b description jumbalya
Related Commands
fc srp itl
show interface fc
show fc srp initiator
OL-9163-02
fc srp target wwpn {description desc | ioc-guid guid}
no fc srp target wwpn [description | service-name]
World-wide port name (WWPN) of the target port.
(Optional) Applies a text description to the target port.
Description to apply to the target port.
Manually assigns an I/O Controller (IOC) to the target.
GUID of the IOC to assign to the target.
(Optional) Configures the service name of the target to an empty string.
Cisco SFS 7000 Series Product Family Command Reference Guide
fc srp target
3-17
Advertisement
Table of Contents
