Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 Command Reference Manual page 186

show card
Table 6-8
Field
boot status
boot image
product serial-number
pca serial-number
pca number
fru number
When you run the show card command on a Cisco SFS 7008, an asterisk (*) next to the slot number
Note
identifies the controller card on which you executed this command. The asterisk does not identify the
normal or standby controllers. That information appears in the oper code column.
Examples
This example displays the configuration and status information for cards 5, 9, 14, and 16:
SFS-7000P# show card 5,9,14,16
============================================================================
============================================================================
slot type
----------------------------------------------------------------------------
5
9
14
16
============================================================================
============================================================================
slot stage
----------------------------------------------------------------------------
5
9
14
16
Cisco SFS 7000 Series Product Family Command Reference Guide
6-20
show card Command Field Descriptions (continued)
Description
Boot Status may appear as any of the following:
upgrading
•
• success
failed
•
• badVersion
badCrc
•
• memoryError
outOfSpace
•
• programmingError
hardwareError
•
• fileNotFound
inProgress
•
Displays the active system image that the card runs when it boots.
Displays the factory-assigned product serial number of the card.
Displays the Printed Circuit-Assembly (PCA) serial number of the card.
Displays the Printed Circuit-Assembly (PCA) assembly number of the card.
Displays the field-replaceable unit (FRU) number of the card.
admin oper
type
en4port1G en4port1G
fc2port2G fc2port2G
controller controller
ib12port4x ib12port4x
boot boot
status
done success
done success
done success
done success
Card Information
admin
status
up
up
up
up
Card Boot Information
boot
image
OS-1.1.2/build084
OS-1.1.2/build084
OS-1.1.2/build084
OS-1.1.2/build084
Chapter 6 Show Commands
oper oper
status code
up normal
up normal
up normal
up normal
OL-9163-02