Table of Contents
Advertisement
show fan
show fan
To display the status of the fans in your Server Switch, enter the show fan command in User Exec mode
or Privileged Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012
Privilege Level:
General read-only user.
For the health of your Server Switch, both fans should be operating while your Server Switch runs. If
the operational status of a fan appears as "down," contact customer support for a fan module
replacement.
Command Output:
Table 6-19
Table 6-19
field
fan
oper status
speed (%)
product serial number
pca serial-number
pca number
fru number
Cisco SFS 7000 Series Product Family Command Reference Guide
6-52
show fan
describes the fields in the show fan command output.
show fan Command Field Descriptions
description
Fan number. Fan 1 resides on the left-side as you are facing the front of the
chassis. Fan 2 resides on the right-side of the chassis.
Operational status of the fan. The value appears as unknown, up, down, or
failure. An up value indicates the fan functions correctly.
Speed of the fan as a percentage of the maximum speed of the fan.
Factory-assigned product serial-number.
Printed Circuit-Assembly (PCA) serial-number.
Printed Circuit-Assembly (PCA) assembly-number.
Field-replaceable unit (FRU) number.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
