Table of Contents
Advertisement
arp ethernet
arp ethernet
To statically map an IP address to the physical machine address of an Ethernet host on the local network,
enter the arp ethernet command in Global Configuration mode. To clear a static IP address, use the no
form of this command.
Syntax Description
ip-address
mac-address
slot#
port#
Defaults
This command has no default settings.
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-write user.
The Server Switch supports dynamic ARP so that any IP host that connects to an Ethernet gateway port
may see or detect all the other connected IP and IPoIB hosts.
An ARP table contains the available ARP records in the gateway. An ARP record may be dynamically
learned or statically created. In most cases, you can rely upon dynamic ARP addressing. Dynamic ARP
records may be deleted from the table after a period of time, or updated, if a host address-change occurs.
Examples
SFS-7000P(config)# arp ethernet 10.2.0.50 00:30:48:23:A9:0A 4/1
Related Commands
show arp ethernet
Cisco SFS 7000 Series Product Family Command Reference Guide
5-2
arp ethernet ip-address mac-address slot#/port#
no arp ethernet ip-address mac-address
IP address of the host.
MAC address of the host.
Slot on the Server Switch that holds the Ethernet gateway that connects to
the host.
Ethernet gateway port that connects to the host.
Chapter 5
IP Commands
OL-9163-02
Advertisement
Table of Contents
