Table of Contents
Advertisement
ib pm
ib pm
To configure performance monitoring, enter the ib pm command in Global Configuration mode.
Syntax Description
subnet-prefix
prefix
connection
monitor
reset-counter
test
src-lid
source-LID
dst-lid
destination-LID
polling-period
seconds
port
counter
node-guid
GUID
port-num
num
start-delay
delay
state
disable
enable
enable-topspin-switches Enables monitoring on all Server Switches in the subnet.
enable-all
Cisco SFS 7000 Series Product Family Command Reference Guide
4-4
ib pm subnet-prefix prefix {connection {monitor | reset-counter | test} src-lid source-LID
dst-lid destination-LID | polling-period seconds | port {counter | monitor node-guid
GUID port-num num | reset-counter [node-guid GUID [port-num num]]}| start-delay
delay | state {disable | enable | enable-topspin-switches | enable-all}| threshold
{excess-buf-overruns | link-downs | link-recovery-errors | local-link-errors |
rcv-constrnt-errors | rcv-errors | rcv-rate | rcv-rem-phy-errors |
rcv-sw-relay-errors | symbol-errors | vl15-droppeds | xmit-constrnt-errors |
xmit-discards | xmit-rate} int}
Specifies the subnet prefix of the IB subnet on which you want to configure
performance monitoring.
Subnet prefix of the IB subnet on which you want to configure performance
monitoring
Specifies a connection-level action. Designates a connection that you want
to monitor, reset, or test. You specify the connection with the src-lid and
dst-lid arguments.
Configures monitoring of the port or connection.
Resets the performance monitoring counter(s).
Starts a connection test.
Specifies the source Local Identifier (LID) of the connection.
Source Local Identifier (LID) of the connection.
Specifies the destination Local Identifier (LID) of the connection.
Destination Local Identifier (LID) of the connection.
Interval at which monitoring polls occur.
Interval at which monitoring polls occur, in seconds.
Specifies a port-level action. Designates a port you want to monitor or reset.
Specify the port with the node-guid and port-num arguments.
Enables the IB PM port counter feature.
Specifies the GUID of the node that contains the port that you want to
monitor.
GUID of the node that contains the port that you want to monitor.
Specifies the port number to monitor.
Port number to monitor.
Delay time before performance monitoring starts after being enabled.
Delay time before starting performance monitoring, in seconds.
Configures the state of performance monitoring.
Disables monitoring.
Enables monitoring.
Enables monitoring on all ports in the subnet.
Chapter 4
InfiniBand Commands
OL-9163-02
Advertisement
Table of Contents
