Chapter 3
Fibre Channel Commands
fc srp-global lun-policy restricted
Enable LUN masking on all new ITs and ITLs, with the fc srp-global lun-policy restricted
command in Global Configuration mode. Disable default LUN masking with the no form of the
command.
Syntax Description
This command has no arguments or keywords.
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user or Fibre Channel read-write user.
Enable global LUN masking to deny LUN access to new initiators so that they cannot communicate with
SAN nodes until you grant them access on an individual basis. Disable LUN masking to grant new ITLs
immediate access to all LUNs.
An initiator requires both port and LUN access before it can successfully access a LUN. To grant port
Note
access, use the fc srp-global gateway-portmask-policy restricted, fc srp it and fc srp itl
commands.
Policies only apply to ITs and ITLs that you create after you configure the policies.
Note
Examples
The following example denies all new initiators access to all LUNs:
SFS-7000P(config)# fc srp-global lun-policy restricted
Defaults
Restricted.
OL-9163-02
fc srp-global lun-policy restricted
no fc srp-global lun-policy restricted
Cisco SFS 7000 Series Product Family Command Reference Guide
fc srp-global lun-policy restricted
3-23
Need help?
Do you have a question about the SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 and is the answer not in the manual?