Table of Contents
Advertisement
show interface mgmt-serial
show interface mgmt-serial
This command displays the default configuration. This configuration cannot be changed. To display the
configuration of the Serial Console port on the controller card of your Server Switch, enter the show
interface mgmt-serial command in User Exec mode or Privileged Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
The Serial Console port is the initial connection point with the system chassis and is used to configure
the Ethernet Management and Infiniband Management ports. This port must be configured and a
management station attached before any interaction with the system chassis is possible.
For the Cisco SFS 3012, you may only access the Serial Console port on the currently active controller
card.
Examples
The following example displays the default interface management serial configuration:
SFS-7000P# show interface mgmt-serial
===============================================================
===============================================================
SFS-7000P#
Related Commands
show interface mgmt-ethernet
show interface mgmt-ib
shutdown
Cisco SFS 7000 Series Product Family Command Reference Guide
6-180
show interface mgmt-serial
Mgmt-Serial Information
baud-rate : 9600
data-bits : 8
stop-bits : 1
parity : off
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
