Table of Contents
Advertisement
show ib sm neighbor
show ib sm neighbor
To display the InfiniBand devices that directly connect to your Server Switch, enter the
show ib sm neighbor command in User Exec mode or Privileged Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Command Output:
Table 6-38
Table 6-38
Field
subnet-prefix
local-node-guid
local-port-id
local-node-type
remote-node-guid
remote-port-id
remote-node-type
link-state
link-width-active
Cisco SFS 7000 Series Product Family Command Reference Guide
6-108
show ib sm neighbor
describes the fields in the show ib sm neighbor command output.
show ib sm neighbor Command Field Descriptions
Description
64-bit value that identifies the InfiniBand subnet to which this neighbor node
belongs.
64-bit GUID of the InfiniBand node.
Port ID of the InfiniBand node. You must enter an integer between 0 and 255.
Type of the InfiniBand node. The value appears as channel-adapter, switch, or
router.
64-bit GUID of the neighboring InfiniBand node to which the local node links.
Port ID of the neighboring InfiniBand node to which the local node links. You
must enter an integer between 0 and 255.
Type of the neighboring InfiniBand node. The value appears as
channel-adapter, switch, or router.
State of the link between the local and neighboring nodes. The value appears
as noStateChange, down, initialize, armed, or active.
Active link width. This parameter, with LinkSpeedActive, determines the link
rate between the two connected nodes. The value appears as width1x, width4x,
or width12x.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
