Logging In; Authentication - Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 Command Reference Manual

Chapter 1 Using the CLI
Note If a user does not have access to particular functionality, that functionality will not appear in the CLI,
on-line help, or any GUI management windows.
The unrestricted (super) administrator assigns these roles.
levels.
Table 1-2
Role
ib-ro
ib-rw
ip-ethernet-ro
ip-ethernet-rw
fc-ro
fc-rw
unrestricted-rw
To configure accounts, see the username command in the

Logging In

At the CLI prompt, enter the appropriate username and password to log in as the super user.
Login: super
Password: xxxxx
SFS-7000P>
You are now logged in as an administrator and can view and configure the CLI configuration.
Note Server Switches support up to three concurrent CLI sessions.

Authentication

You can use any of the authentication methods shown in
Table 1-3
Authentication
local
local and then RADIUS
RADIUS and then local
OL-9163-02
Access Levels
Description
InfiniBand read-only access.
InfiniBand read-write access.
Ethernet read-only access.
Ethernet read-write access.
FibreChannel read-only access.
FibreChannel read-write access.
Read-write access to all network configuration commands.
Authentication Methods for Logging In
How it Works
Verifies against the chassis database.
Verifies against the chassis database then checks the RADIUS
server.
Checks the RADIUS server and then verifies against the chassis
database.
Cisco SFS 7000 Series Product Family Command Reference Guide
Starting A CLI Session
Table 1-2 lists and describes these access
"username" section on page
Table 1-3.
2-80.
1-3