Table of Contents
Advertisement
show host
show host
To display the DNS name servers and domain name that your Server Switch uses, enter the show host
command in User Exec mode or Privileged Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Fibre Channel read-only user.
Use this command to display the network domain of the chassis and the DNS servers that your Server
Switch uses to resolve network names to IP addresses.
Table 6-28
Table 6-28
Field
name-server-one
name-server-two
domain-name
Examples
The following example displays the IP addresses of the DNS servers that the Server Switch uses to
resolve host names:
SFS-7000P# show host
============================================================================
============================================================================
SFS-7000P#
Cisco SFS 7000 Series Product Family Command Reference Guide
6-74
show host
describes the fields in the show host command output.
show host Command Field Descriptions
Description
IP address of the primary name server.
IP address of the backup name server.
Host name of the Server Switch.
Host Information
name-server-one : 10.3.106.20
name-server-two : 0.0.0.0
domain-name : shasta
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
