Table of Contents
Advertisement
username
username
To reconfigure or create and configure user accounts, enter the username command in Global
Configuration mode. To delete a user account, use the no form of this command.
Syntax Description
password
disable
enable
community-string
no-community-string
privilege
user
passwd
string
priv
Defaults
Guest user accounts are disabled by default. All other user accounts are enabled.
Command Modes
Global Configuration (config) mode.
Cisco SFS 7000 Series Product Family Command Reference Guide
2-80
username user password passwd
Creates a new user account.
username user {[disable | enable] | [community-string string | no-community-string] |
privilege priv[priv priv...]}
Reconfigures an existing user account
no username user
Deletes an existing user account.
Configures the password for the user account.
(Optional) Disables the user account.
(Optional) Enables the user account.
(Optional) Assigns a SNMP community string to the user account.
(Optional) Clears the SNMP community string of the user.
Assigns access privileges to the user.
Note
Account login name (up to 20 alphanumeric characters).
Account password (5 to 34 alphanumeric characters).
SNMP community string.
(Optional) Access privilege. The priv variable may be any of the following:
•
•
•
•
•
•
•
When you assign privileges, new privileges completely overwrite
your previous privilege settings. If you omit an access privilege, the
user account will lose this privilege even if you previously assigned
it to the account.
ib-ro, for InfiniBand read-only access
ib-rw, for InfiniBand read-write access
ip-ethernet-ro, for Ethernet read-only access
ip-ethernet-rw, for Ethernet read-write access
fc-ro, for Fibre Channel read-only access
fc-rw, for Fibre Channel read-write access
unrestricted-rw, for universal read-write access
Chapter 2
Administrative Commands
OL-9163-02
Advertisement
Table of Contents
