Table of Contents
Advertisement
Chapter 2
Administrative Commands
addr-option
To configure the Ethernet Management port to
•
•
•
enter the addr-option command in Ethernet Management Configuration submode.
Syntax Description
auto
dhcp
static
Defaults
This command has no default settings.
Command Modes
Ethernet Management Configuration (config-mgmt-ethernet) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Ethernet read-write user.
If you use the static keyword, configure the IP address of the Ethernet Management port with the
section on page
Examples
The following example configures the Ethernet Management port to obtain an IP address from a DHCP
server:
SFS-270(config-if-mgmt-ethernet)# addr-option dhcp
Related Commands
ip
OL-9163-02
use a static IP address,
obtain an IP address from a DHCP server,
automatically obtain an IP address from a hardware-designated controller,
addr-option {auto | dhcp | static}
Applies an IP address from an outside controller to the Ethernet
Management port.
Uses DHCP to configure the address for the Ethernet Management port.
Changes the address of the Ethernet management port from the DCHP
address to the static address that you configure with the ip command.
5-8.
Cisco SFS 7000 Series Product Family Command Reference Guide
addr-option
"ip"
2-5
Advertisement
Table of Contents
