Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 Command Reference Manual page 316

show interface ethernet
Table 6-56
Field
reasm max-size
type
status
Table 6-57
Table 6-57
Field
port
default-ttl
in-receives
in-hdr-errors
in-addr-errors
forw-datagrams
in-unknown-protos Cumulative number of datagrams that the port successfully received but discarded
in-discards
in-delivers
out-requests
out-discards
Cisco SFS 7000 Series Product Family Command Reference Guide
6-150
ip Keyword Output Field Descriptions (continued)
Description
Size of the largest IP datagram which this port can receive and reassemble from
incoming fragmented IP datagrams.
Displays "primary" or "backup" to indicate that the interface card acts as the
primary or backup interface for the IP address that appears in the address field.
Displays "active" or "inactive" to indicate that the card actively services IP packets
addressed to the IP address in the address field or does not service packets to the
specified address.
describes the fields in the ip-info keyword output.
ip-info Keyword Output Field Descriptions
Description
Port number, in slot#/port# format.
Default time-to-live value, in seconds.
Cumulative number of input datagrams (including errors) that interfaces received
for the IP address that you specified with the ip keyword.
Cumulative number of datagrams that interfaces discarded. Reasons to discard a
datagram include the following:
bad checksums
•
• version number mismatches
format errors
•
• exceeded time-to-live values
IP option processing errors
•
Cumulative number of input datagrams that ports discarded because the IP
address in the destination field of the header of the datagram was not a valid
address to be received by the port.
Cumulative number of datagrams that arrived at the port en-route to a final
destination. For non-IP-gateway ports, this value includes only packets that the
port Source-Routed successfully.
due to an unknown or unsupported protocol.
Cumulative number of datagrams that the port discarded for a reason other than a
problem with the datagram (for example, lack of buffer space).
Cumulative number of input datagrams that the port successfully delivered to IP
user-protocols, including Internet Control-Message Protocol (ICMP).
Cumulative number of IP datagrams that local IP user-protocols (including ICMP)
supplied to IP in-requests. This counter does not include any datagrams counted
as forw-datagrams.
Cumulative number of output IP datagrams that the port discarded for a reason
other than a problem with the datagram (for example, lack of buffer space).
Chapter 6 Show Commands
OL-9163-02