Table of Contents
Advertisement
show cdp neighbors
show cdp neighbors
To display the information for neighbors CDP has discovered, enter the show cdp neighbors
command in User Exec mode or Privileged Exec mode.
Syntax Description
type number
detail
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Examples
The following example displays the CDP neighbors information:
SFS-7000P# show cdp neighbors
================================================================================
================================================================================
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
device-id
--------------------------------------------------------------------------------
svbu-q8-c2950.svbu-q8-c2950.cisco.com²(- 180
FastEthernet0/4-24
Related Commands
show cdp
show cdp entry
show clock
Cisco SFS 7000 Series Product Family Command Reference Guide
6-28
show cdp neighbors [type number] [detail]
(Optional) Displays the type of device discovered, the device name, the
number and type of the local interface (port), the number of seconds the
CDP advertisement is valid for the port, the device type, the device product
number, and the port ID.
(Optional) Displays information about the native VLAN ID, the duplex
mode, and the VTP domain name associated with the neighbor device.
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
hold-time capability platform
CDP neighbors
S
Chapter 6
Show Commands
port-id
cisco WS-C2950T-24
OL-9163-02
Advertisement
Table of Contents
Need help?
Do you have a question about the SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 and is the answer not in the manual?
Questions and answers