Show Ib Pm Config - Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 Command Reference Manual

Chapter 6 Show Commands

show ib pm config

To view the performance monitoring configuration on an InfiniBand subnet, enter the show ib pm
config command in User Execute mode or Privileged Execute mode.
Syntax Description
subnet-prefix
prefix
Defaults
This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Table 6-32
Table 6-32
Field
subnet-prefix
state
polling period
start-delay
Examples
The following example displays the output of the show ib pm config command:
SFS-120# show ib pm config subnet-prefix fe:80:00:00:00:00:00:00
================================================================================
================================================================================
OL-9163-02
show ib pm config subnet-prefix prefix
Specifies the subnet prefix of the InfiniBand subnet for which you want to
view performance monitoring.
Subnet prefix of the InfiniBand subnet for which you want to view
performance monitoring
describes the fields in the show ib pm config command output.
show ib pm config Command Output Descriptions
Description
Subnet prefix of the InfiniBand subnet with the performance monitoring
configuration you are viewing.
State of performance monitoring (enabled or disabled).
Interval at which the feature polls ports and connections (in seconds).
Time that elapses before performance managing executes (in seconds).
subnet-prefix : fe:80:00:00:00:00:00:00
state : enable
polling-period : 10
start-delay : 60
IB PM Configuration
Cisco SFS 7000 Series Product Family Command Reference Guide
show ib pm config
6-81