Table of Contents
Advertisement
trace
trace
To track internal Server Switch program modules that specific interface cards call, enter the trace
command in Global Configuration mode.
Note
Use this command only under the direction of support personnel for program debug purposes.
Syntax Description
app
module
level
flowmask
card
no-display
very-terse
terse
verbose
very-verbose
scream
app
mod
val
slot
Defaults
This command has no default settings.
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-write user.
Use this command to debug your system.
Cisco SFS 7000 Series Product Family Command Reference Guide
2-76
trace app app module mod level {no-display | very-terse | terse | verbose | very-verbose |
scream} flowmask val [card slot]
Identifies an internal application to trace.
Identifies a program module to trace within the specified application.
Specifies the verbosity level of the trace command output.
Masks modules that you do not want to display.
(Optional) Identifies the card to trace.
Disables tracing when you also set the val variable to 0x00.
Contact technical support for details.
Contact technical support for details.
Contact technical support for details.
Contact technical support for details.
Contact technical support for details.
Integer that indicates the internal application to trace.
Program module within the application.
Decimal or hexadecimal value of modules to mask. A value of 0xFFFFFFFF
masks all modules. A value of 0x00 displays all modules.
(Optional) Slot number of the card to trace.
Chapter 2
Administrative Commands
OL-9163-02
Advertisement
Table of Contents
